SUNDOWN AUDIO | UV2 SERIES 10″ | 2000W RMS | D4 OHM

SUNDOWN AUDIO Uv2 SERIES 10″ (1750W RMS) D4 OHM:

RMS 1750 watts
Dual 2 or 4 ohm voice coils
Optimized for small ported enclosures
Aluminum 3 voice coil former for superior heat dissipation
High-temperature copper voice coil
Double stitched surround
Heavy-duty cast basket
Spring-loaded terminals accept up to 8-gauge wire
Stitched-on heavy-duty tinsel leads
Solid pole with vent channels and aluminum shorting ring cap
Rear gap-venting
Top-Plate Cooling Channels

Designed to be at home in the competition lanes or playing your favorite music, the U Series is the premier standard suspension woofer in the Sundown lineup. A double-stacked 9.4-inch wide ferrite magnet system is coupled to a thick top plate. A thick set of shorting rings are used inside the magnets and on the pole cap, smoothing out frequency response while doubling as a heat sink and airflow guide. A custom, substantially thicker aluminum frame was designed specifically for the U Series, equipped with heat dissipation ribs. The U v.2 motor also features an extended pole piece to keep the coil under perfect control under high stress. The coil temperature is kept in check via a high-velocity solid pole / machined pole channels arrangement and a series of 16 direct air-gap vents in the back plate.

Specifications

RE (Ohms)
3.918
6.1962

FS (Hz)
49.9826
48.2463

VAS (L)
5.6312
6.1900

Qes
0.5327
0.6317

Qms
4.4138
4.5611

Qts
0.4753
0.5548

Le (mH)
3.1056
4.1634

BL (NA)
26.5116
29.7199

Mms (Grams)
304.2236
297.0392

Cms (uM/N)
33.3280
36.6351

Sens (dB @ 1w/1m)
82.9533

82.1635

Xmax
30mm

30mm

T/S SPECSUV.2 10″ D2UV.2 10″ D4

Enclosure Specifications

Sealed Enclosure
0.5 cu ft

Ported Enclosure
1.0 cu ft

Recommended Tuning
35Hz

Recommended Port Area
16 sq in

Displacement
0.21 cu ft

Depth
8.15

Outside Diameter
11

Cut-Out
9.75

Physical Dimensions
Download