1963 1964 1965 1966 1967 Nova lower control arm Spherical bearing kit Part Number: SP-4

One of the biggest complaints we hear from 1963, 1964, 1965, 1966, and 1967 Nova and Chevy II owners is front end wander. There are 4 things in the front end that must be done to stop the problem. The first is installing a SP-4 bearing kit in the lower control arm. The stock rubber bushing causes two problems: First the bushing tries to rotate the eccentric cam that sets the alignment when the suspension moves up and down. When the cam rotates the entire alignment is gone camber, caster and toe. The bearing kit removes the load causing the cam to shift. Second; many younger mechanic dont know about the step down washers that the factory installed in the bushings. The washers are on each end of the bushing. They are not included with the replacement parts, so if the mechanic is not aware of the washers they will be tossed out with the old parts. the washers go into the ends of the rubber bushing and step the bolt hole size down to 1/2 inch from 9/16. When the washers are not installed the lower arm will shift over bumps throwing the alignment out. This can happen rolling of the alignment rack. Again the Global west bearing kit will eliminate the problem.

This kit is used for street applications and just about anything else drag racers love it.

The other 3 items for fixing the alignment are Part # LOC-2 , srb-7, and you sending in your idler arm, center link with the frame bracket and Global West will custom build Del-a-lum bushings for the linkage. The pieces are sent back assembled ready to go.

If you want Global West can install the bearing kit SP-4 in the lower arms. The job does require welding , a good welding shop can handle it also.

Benefits and Features:
Bearing kit replaces the factory bushings.
Spherical aircraft bearings allow smooth movement without bind.
Bearings are Teflon lined so no grease fittings are needed.
Kit controls alignment providing improved response and vehicle control.
Maintains correct control arm length.

Note: welding is required with this kit.

Enhance Your 1963-67 Novas Performance with Our Lower Control Arm Spherical Bearing Kit

At Global West, we understand the passion and dedication that goes into restoring and maintaining classic American muscle cars. Thats why weve developed our Lower Control Arm Spherical Bearing Kit for 1963-67 Nova and Chevy II models. This kit is designed to address common issues with front end wander, providing a solid and reliable solution that enhances your vehicles performance and stability. Crafted with precision and quality, our bearing kit replaces the factory bushings with spherical aircraft bearings for smooth, bind-free movement. Plus, theyre Teflon lined, eliminating the need for grease fittings.

Our commitment to quality doesnt stop at our products. We provide comprehensive DIY instructions and video tutorials to guide you through the installation process. And if you need further assistance, our dedicated customer support team is always on hand to help. We understand that every classic car restoration project is unique, and were here to ensure you get the best results from our products.

Whether youre a seasoned mechanic or a DIY enthusiast, our Lower Control Arm Spherical Bearing Kit is a valuable addition to your 1963-67 Nova or Chevy II restoration project. Its not just about fixing a problemits about enhancing your vehicles performance and preserving its classic appeal.

Explore more high-quality Chevrolet Parts Online or delve into our extensive range of 1963-67 Nova Parts. For specific steering components, check out our 1963-67 Nova Steering category. At Global West, were here to help you get the most out of your classic American muscle car.