SUNDOWN AUDIO | E12 V4 12″ SUBWOOFER D2 | 750W RMS – 2 OHM

SUNDOWN AUDIO E v4 12″ Subwoofer | 500W RMS DVC – 2 OHM
For those who like to go big or go home but on a budget, theSundown Audio E v4 12″ 500W RMS D2Subwoofer is a perfect choice. With a double-stacked magnet structure and an extremely long voice coil, this subwoofer is designed for linear x-max of 14mm one-way. Additionally, the high mechanical clearances (over 2 peak-to-peak before physical coil bottom) give you plenty of room to experiment without fear of damaging your equipment. And if that wasn’t enough, the E series V4 has been upgraded to a full 2.5 diameter coil (this started with the v.3), compared to the 2 coil of previous generations (v.1 and v.2). Plus, the tinsel leads have been upgraded to a new Mini-XL lead containing 63-strands of the conductor (a full XL is 84-strands and previous leads contained 42-strands) to help prevent potential failure due to amplifier clipping. Finally, the spider is a high-strength poly-cotton blend designed to handle the full capacity of the motor. So if you’re looking for a powerful and reliable subwoofer, look no further than the Sundown Audio E v4 12″ 500W RMS D2 Subwoofer.This design features a newly tooled, significantly stronger frame meant to resemble the cast frame on the SA v.2 and U series models.

SpecificationsE12 v.4 D2E12 v.4 D4

RE (ohms)
3.80
5.80

FS (Hz)
30.325hz
30.645hz

Vas (L)
69.849
73.277

Qes
0.405
0.462

Qms
5.538
5.393

Qts
0.377
0.426

BL (NA)
15.912
17.863

Mms (Grams)
141.528
132.102

Cms (uM/N)
194.627
204.177

Sens (1w/1m)
88.7dB
88.5dB

E12 v.4

Sealed
1.0 ft^3

Ported
1.75 ft^3

Displacement
0.12 ft^3

Depth
6 1/2″

Outside Diameter
12 1/4″

Cut-Out
11 1/8″

Recommended Tuning
32hz

Recommended Port Area
28 in^2

More from Sundown Audio E series v4 12:

Sundown Audio E12 v.4 D4 Subwoofer(4 OHM VERSION)
Sundown Audio E12 v.4 12 inch DUAL (2 x 12) LOADED BASS PACKAGE PORTED
Sundown Audio E12 BASS PACKAGE
Sundown Audio E12 v.4 12 inch SINGLE (1x 12) LOADED BASS PACKAGE PORTED