SUNDOWN AUDIO | SA V2 10″ SUBWOOFER | 1250W RMS | D4

Sundown Audio SA 10 | Version 2 |Dual 2 OHM| 1000w RMS Version 2 Subwoofer
Since 2009, the Sundown SA series has been our most popular line. What better way to make a new version 2 than to upgrade everything? Using a larger, more powerful motor, Sundown Audio maintains the perfect balance of the original SA series while increasing the power handling to 1000-watts RMS. TheSundown Audio SA 10 v.2is here
Sundown Audio SA 10 Version 2 Specs & TS:

Xmax = 19mm one-way by 70% BL
SA 10 v2 RMS Power = 1000-watts
Vented magnetic gap
Optimized high-velocity pole vent
Innovative high-velocity vented frame spacer ring
Black Aluminum 2.75 voice coil former for superior heat dissipation
High-Temperature copper voice coil wire
Large aluminum faraday ring (Magnet ID)
Spring Loaded Terminals
Stitched-On Double XL Tinsel Leads to prevent fatigue and failure
High strength cast aluminum frame
Optimized for small ported, sealed, & band-pass enclosures

T/S SPECSSAV2 10 D2SAV2 10 D4

RE (Ohms)
3.90
6.82

FS (Hz)
37.0810
36.1409

VAS (L)
10.3683
12.3547

Qes
0.3598
0.3744

Qms
3.7041
3.5051

Qts
0.3280
0.3383

Le (mH)
3.5178
4.4560

BL (NA)
28.3634
31.5270

Mms (Grams)
318.8226
281.6632

Cms (uM/N)
57.7815
68.8513

Sens (dB @ 1w/1m)
83.42
83.67

ENLCOSURE SPECIFICATIONS

Sealed Enclosure
0.5 cu ft

Ported Enclosure
1.0 cu ft

Recommended Tuning
35Hz

Recommended Port Area
15 sq in

Displacement

Depth
6.92″

Outside Diameter
10.94

Cut-Out
9.17

SHOP ALLSundown Audio Subwoofers